Single and double-sided printed circuit boards
The most common application is the production of high quality professional printed circuit boards in a prototyping environment. The X60 can mill isolation lines as small as 4 mil (100 µm) and drill holes as small as 150 µm (6 mil). This reproduces a prototype accurately from the original design data, including the precise geometry needed for SMT components.
|
| |
 |
| |
Double-sided prototype PCB |
|
| |
|
RF and Microwave boards
The X60 uses a non contact depth sensing foot. This feature combined with the high motor speed of up to 60,000 rpm allows superior milling results especially in soft and thin microwave materials such as Rogers RO4000, TMM®, RT/duroid® and similar substrates. |
| |
 |
| |
Microwave board using Rogers RO4003 substrate |
|
| |
|
Plated through-holes (PTH)
LPKF offers a variety of through-hole plating solutions for prototype circuit boards including the silver polymer based ProConduct® systems and MiniContac RS electroplating tanks. All of these through-hole plating methods are compatible with the ProtoMat X60. |
| |
 |
| |
Cross-section of a plated-through hole |
|
| |
|
Multilayer boards
The ProtoMat X60 can fabricate multilayer boards if used in conjunction with a board lamination press such as the LPKF MultiPress II and a through-hole electroplating system such as the LPKF Contac and MiniContac RS. |
| |
 |
| |
LPKF multilayer press |
|
| |
|
Routing slots, cut outs and board profile
LPKF circuit board plotters easily rout out complex board contours. Slots, cut-outs, break-out tabs and other features are also simple to program and cut. |
| |
 |
| |
Routed board contour |
|
| |
|
Reworking bare boards
Rework bare boards with the X60 by removing a plated hole, for example, or by severing key tracks. The optional fiducial camera system allows quick and easy registration. |
| |
 |
| |
Bare board production panel |
|
| |
|
Solder mask / legend printing
Prototype PCBs produced on an X60 can be finished with a production quality solder mask and legend printing using the LPKF ProMask system in about 40 minutes. |
| |
 |
| |
Instant Solder mask on prototype boards with LPKF ProMask |
|
| |
|
Front panels, signs and plaques
LPKF circuit board plotters are also useful for engraving front panels, signs and plaques with extraordinary precision, on various materials such as plastics, Plexiglas, aluminum, brass, and others.
The long machine bed of the X60 can accommodate full 19” front panels.
|
| |
 |
| |
Engrave text on front panels |
|
| |
|
Inspection templates
The LPKF ProtoMat X60 is well suited for the precise machining of inspection templates -- a crucial element in the assembly of printed circuit boards. |
| |
 |
| |
Inspection template for SMT assembly |
|
