| Minimum track width |
4 mil (0.1 mm) |
| Minimum gap |
4 mil (0.1 mm) |
| Minimum hole diameter |
6 mil (0.15 mm) |
| Working area (x/y/z) |
9” x 12” x 1.5” (229 x 305 x 38 mm) |
| Resolution (x/y) |
0.01 mil (0.25 µm) |
| Resolution (z) |
0.02 mil (0.5 µm) |
| Milling motor |
100,000 rpm |
| Tool change |
Automatic, 10 stations |
| Collet |
1/8” quick-release collet |
| Drilling capacity |
150 holes per minute |
| Positioning speed (max.) |
150 mm per second |
| X/Y positioning system |
3-phase stepper motor |
| Z-Drive |
Stepper motor |
| Dimensions (W/H/D) |
25.6” x 20” x 13.5” (650 x 510 x 800 mm) |
| Weight |
121 lbs. (55 kg) |
| Power Supply |
120/240V, 50-60 Hz/200 VA |
| Hardware and software specifications |
Microsoft® Windows® 2000/XP, 700 MHz processor or higher, min. 256 MB RAM (512 MB recommended), screen resolution min. 1024 x 768 pixels, USB 2.0 |
| * Subject to technical modifications |
|
 |
|
