ProtoMat H100

ProtoMat H100

High-end PCB milling with expanded working area

You are here: Products > PCB Prototyping > PCB Milling Machines > ProtoMat H100

The ProtoMat H100 is a high-end PCB milling system offering maximum performance and an expanded layout area at 15” x 14.4” for processing large printed circuit board applications. Its 100,000 rpm spindle and high accuracy tool depth setting features ensure board geometries are milled with the finest precision allowing nearly unattended operations. This makes the H100 ideal for RF and microwave applications.

The system works straight from CAD data to process boards and is fully capable of milling, drilling, and routing applications on a wide range of laminated PCB substrates. Standard features such as an optical fiducial recognition camera, vacuum table, and non-contact depth limiter make the H100 a fully-loaded premier system for rapid PC board creation. 4 mil traces and spacing are common on a wide range of materials with drill holes as small as 6 mil; smaller features may be possible on select materials smaller features may be possible dependent on tooling, copper thickness, substrate type and peel strength.

Software Package

LPKF CircuitPro software is included with easy to follow processing guide wizards and updated GUI. This simplifies the process of arriving at a completed design with the machine prompting the operator during each milling, drilling and cutting stage. A comprehensive parameter library for many commonly used materials supports the users in their own projects.

ProtoMat Engineering

The LPKF ProtoMat PCB milling systems utilize the highest quality stepper motors, spindle motors and H-shaped guide rails mounted to a durable frame to ensure pristine milling, drilling and cutting quality for years of operation. Spindle runout below 5µm and an internal calibration completed on each machine is standard with over 40 years of German engineering experience applied in development of each model.

Technical Specifications: ProtoMat H100

Max. material size and layout area (X/Y/Z) 380 mm x 365 mm x 14 mm (15” x 14.4” x 0.55”)
Resolution (X/Y) 0,25 μm (0.01 mil)
Repeatability ± 0.001 mm (± 0.04 mil)
Precision of front-to-back alignment ± 0.02 mm (± 0.8 mil)
Milling spindle Max. 100,000 rpm, software controlled
Tool change Automatic, 30 positions
Milling width adjustment Automatic
Tool holder 3.175 mm (1/8”), pneumatic release holder
Drilling speed 120 strokes/ min
Travel speed (X/Y) Max. 150 mm/s (6”/s)
X/Y-drive 3-phase stepper motor
Z-drive Pneumatic, 14 mm (0.55”)
Dimensions (W x H x D) 650 mm x 430 mm x 750 mm (25.6” x 17” x 29.5”)
Weight 50 kg (110 lbs)
Operating Conditions  
Power supply 115/230 V, 50 – 60 Hz, 300 W
Compressed air supply 6 bar (87 psi), 100 l/min (3.5 cfm)
Required accessories PC, Dust extraction, included
Technical specifications subject to change.
International inquiries click here.
Let us know what you are interested in.
More information