Serial no. for version 5.0 of CircuitCAM PCB, PRO or Plus required. BoardMaster 5.0 included. This upgrade does not apply to customers with CircuitCAM versions 3 or 4.
Allows automatic fiducial recognition, eliminating user interaction, while simplifying the board alignment process. Option includes camera, mounting parts & software - only for LPKF ProtoMat S-Series (Requires USB 2.0).
LPKF EasyContac was developed for prototype circuit boards with less than 50 through-plated holes and PCB repairs. All the necessary parts are conveniently packed in a handy box. The key components of LPKF EasyContac are rivets made out of a special copper alloy. These rivets are available with external diameters of 0.8mm (31mil), 1.0mm (39mil), 1.4mm (55mil) and 1.6mm (63mil). The inner diameter is 0.2mm (8mil) or 0.4mm (16mil) smaller. They are placed in the hole by hand and riveted with the help of a punch tool. The hole can still be populated with a component lead if required before soldering.
The LPKF ProMask® System is a quick, simple, and cost effective solution for creating clean electrical insulation between tracks and components. ProMask® completely protects PCBs from environmental corrosion or oxidation, and provides optimal preparation for short-free soldering. The LPKF ProMask/ProLegend® combination gives prototype PCBs the professional finish they deserve and enables the soldering of SMD or conventional components to a clearly labeled PCB with no fear of short circuits. The necessary components for this process are as follows, the LPKF ProMask or LPKF ProLegend System accessory kit for application (p/n 117072 or 117584), the LPKF UV table (p/n 117192), a Laser Printer (minimum 600 dpi), & a hot-air oven (p/n 115877). LPKF ProMask Consumable Set includes 20 Solder resist packets (Comp A & B), 10 Developer 10.0 Gram packets , 20 Black/White laser printer films, 10 Conditioner 7.0 gram packets, 10 foam rollers, 20 wooden spatulas, & 1 roller tray and handle.
The LPKF ProMask® System is a quick, simple, and cost effective solution for creating clean electrical insulation between tracks and components. ProMask® completely protects PCBs from environmental corrosion or oxidation, and provides optimal preparation for short-free soldering. The necessary components for this process are as follows; The LPKF ProMask system (p/n 117072) the LPKF UV table (p/n 117192), a Laser Printer (min 600 dpi) and a Hot Air Oven (p/n 115877). LPKF ProMask includes, 10 foam rollers, 1 roller tray and roller handle, 10 Developer 10 gram packets, 10 Conditioner 7 gram packets (used to neutralize the Developer), 20 wooden spatulas, 1 cleaning brush, 1 developer flask, 1 developer dish, 20 black/white laser printer films, 1 pair of heavy duty gloves, 10 pairs of disposable gloves, 2 PCB handles, 20 during packets, 20 varnish packets, & 1 cleaner (500 ml) deoxidizer.
Precision measuring microscope with 60x magnification. This microscope features a helcoid focusing, inch scale (0.001” division) with 0.08" viewing range and a lens surface with color corrected coating to insure a bright full-contrast image. It has an anodized aluminum construction with integrated lighting and a clear acrylic base that admits light from all directions. The microscope comes in a high quality custom storage case.
End mills and materials used for the fabrication of RF and Microwave boards. This package contains…Five 0.25 mm (10 mil) end mills, Five 0.4 mm (15.7 mil) end mills , Five 0.8 mm (31.5 mil) end mills), and Five 1.0 mm (39 mil) end mills.
Tools and materials required to begin using the circuit board plotter system. This package contains…Ten Universal Milling Tools, One 1.0 mm (39 mil) End Mill, Two 0.5 mm (19.7 mil) drill bits ), Two 0.6 mm (23.6 mil) drill bits , Five 0.7 mm (27.6 mil) drill bits, Five 0.8 mm (31.5 mil) drill bits, Two 0.9 mm (35.4 mil) drill bits, Two 1.00 mm (39 mil) drill bits, Two 2.95 mm (116.1 mil) drill bits, Two 3.00 mm (118.1 mil) drill bits, Five 1.00 mm (39 mil) contour routers, Five 2.0 mm (79 mil) contour routers, One metal free PCB cleaning pad, Three pieces of backing material and Five pieces of double sided 1/2 oz. Copper FR4 specific to your machine size.
