ProtoMat C60 Circuit Board Plotter

            ProtoMat« C60

The 60,000-rpm programmable speed motor allows the use of an extended range of tools, including small rectangular profiled endmills with diameters as small as 10 mils. Such tools have superior characteristics for RF and microwave applications and allow maximum precision at minimum penetration into the substrate. The high-speed motor also allows maximum density digital design with track/clearance geometries of 4 mil and 8 mil drill holes.

The ProtoMat« C60 is fully compatible with multilayer applications and all common materials including FR4, Rogers RO 4000 and TMM«, as well as PTFE based substrates such as RT/duroid«  and UltraLAM«, TLX«, TLY« and many others.

Print this page
Download PDF Datasheet
Home Page


Minimum Track Width 4 mil (0.1 mm)
Minimum Insulation Width 4 mil (0.1 mm)
Minimum Drill Hole Size 8 mil (0.2 mm)
Working Area 13.4" x 7.8" (340 mm x 240 mm)
Resolution 0.3125 mil (7.937 Ám)
Repeatability +/- 0.2 mil (5 Ám)
Precision of Front-to-Back Alignment +/- 0.8 mil (20 Ám)
Spindle Motor 3 phase-motor, 5,000-60,000 rpm, software controlled
Tool Change semi-automatic, software prompted
Tool Collet 1/8" quick release collet
Drilling Speed 90 strokes / minute
Travel Speed 1.575" per second (40 mm/sec)
Milling Depth Sensing coaxial mechanical sensing
X/Y Positioning System stepper motors, precision lead screws
ActiveCAM« anti-backlash Supermuts«
X/Y Linear System precision linear bushings and shafts
Z Drive electromagnetic with hydraulic damper
Dimensions (w / h / d) 17" x 14" x 22.25" (430 x 355 x 565 mm)
Weight 53 lb. (24 kg)
Power Consumption 200 VA
Acoustic Cabinet optional
Head Lighting included
Other Options micrometer screw depth limitation
contact-less foot (air bearing)
100,000 rpm motor
camera positioning system

LPKF Laser & Electronics, North America

Tech Support Rapid Prototyping Systems
(503) 454-4229 (8am - 5pm Pacific Time)
support@lpkfusa.com

28220 SW Boberg Rd.
Wilsonville, OR 97070
Tel. (503) 454-4200
Toll Free 1-800-345-LPKF


Fax (503) 682-7151
info@lpkfusa.com